EDW-120

2 x RS-232, 1 x 10/100 TX Seri Ethernet Dönüştürücü

Endüstriyel Seri Ethernet Adaptör ve Çevirici, EDW-120

EDW-120 genel özelliklerinden bazıları;

  • 10/100 BaseT ‘den RS-232 / RS-485’e seri dönüşüm
  • Kolay konfügürasyon ve üst seviye diagnostic
  • -25 / +70 °C çalışma sıcaklık aralığı
  • 10-60 VDC enerji besleme girişi
  • Galvanic isolation and transient protection

EDW serisi ürünler sayesinde yalnızca seri portu olan cihazların Ethernet networkleri üzerinden haberleşmesi mümkündür. Hem point to point hem de point to multipoint uygulamalarda kullanılabilir.

EDW-120 ürünleri, bir PC üzerinde yaratılacak olan 2 adet Sanal COM portuna ( Virtual COM ) izin veren yazılım özelliği ile sunulur. Bu yazılım sayesinde normalde lokal COM portuna gönderilen verinin EDW-120 cihazının uzak seri arayüzüne yönlendirilmesi mümkündür ( geleneksel uygulamalarda değişiklik yapma gerekliliğini ortadan kaldırır ).

Tüm Teknik Detaylar İçin Tıklayınız ( Orjinal İngilizce )

Uygulama 1:

EDW-120

Product description
Status Active
Article number 3616-0010
Ports 2 x 9-pin D-sub (male), RS-232
1 x RJ-45, Ethernet
Description Serial Adapter
Warranty period 5 Years
EMC (Electromagnetic Compatibility)
EN 61000-6-2 Immunity industrial environments
EN 61000-6-4 Emission industrial environments
EN 55024 Immunity IT equipment
EN 50121-4 Railway signalling and telecommunications apparatus
IEC 62236-4 Railway signalling and telecommunications apparatus
EMC specifications
EN 61000-4-2, ESD Enclosure contact, ± 6 kV
Enclosure air, ± 8 kV
IEC 61000-4-3, RF field AM modulated Enclosure:
20V/m 80% AM (1 kHz), 80 – 2 000 MHz
12V/m 80% AM (1 kHz), 2 000 – 2 700 MHz
ENV 50204, RF field 900 MHz Enclosure, 20 V/m pulse modulated 200 Hz, 900 ± 5 MHz
EN 61000-4-4, fast transients Signal ports, ± 2 kV
Power ports, ± 2 kV
EN 61000-4-5, surge Signal ports unbalanced, ± 2 kV line to earth, ± 2 kV line to line
Signal ports balanced, ± 2 kV line to earth, ± 1 kV line to line
Power ports, ± 2 kV line to earth, ± 2 kV line to line
EN 61000-4-6, conducted RF immunity Signal ports, 10 V 80% AM (1 kHz), 0.15 – 80 MHz
Power ports, 10 V 80% AM (1 kHz), 0.15 – 80 MHz
EN 61000-4-9, pulsed magnetic field Enclosure, 1000 A/m, 6.4 / 16 µs pulse
EN 61000-4-29, voltage dips and interruption DC power ports:
10 & 100 ms, interruption
10 ms, 30% reduction
10 ms, 60% reduction
+20% above & –20% below rated voltage
EN 55022, radiated RF emission Enclosure, class A
FCC part 15, radiated RF emission Enclosure, class A
EN 55022, conducted emission DC power ports, class B
Safety
EN 60950-1, dielectric strength Signal port to other isolated ports, 1.5 kVrms 50 Hz 1 min
Power port to other isolated ports, 2 kVrms 50 Hz 1 min
Safety UL/CSA/IEC/EN 60950-1, IT
Climatic
Temperature, operating Operating, –25 to +70°C (–13 to +158°F)
Temperature, storage Storage & Transport, –40 to +70ºC (–40 to +158ºF)
Humidity, operating Operating, 5 to 95% relative humidity
Humidity, storage Storage & Transport, 5 to 95% relative humidity
Enclosure
Enclosure UL 94, PC / ABS, flammability class V-1
Dimensions (W x H x D) 34 x 123 x 121 mm (1.33 x 4.84 x 4.76 in)
Weight 0.2 kg
Degree of protection IP 21
Cooling Convection
Mounting Horizontal on 35 mm DIN-rail
Mechanical
IEC 60068-2-6, vibration Operating:
7.5 mm, 5 – 8 Hz
2 g, 8 – 500 Hz
IEC-60068-2-27, shock Operating, 15 g, 11 ms
Interface specifications, power
Rated voltage 12 to 48 VDC
Operating voltage 10 to 60 VDC
Rated current 200 mA @ 12 VDC
100 mA @ 24 VDC
50 mA @ 48 VDC
Rated frequency DC
Inrush current 0.13 A2s @ 48 VDC, @ 10 ms
Startup current < 0.3 A. Sensitive power supplies need current limit >= 0.3A
Polarity Reverse polarity protected
Redundant power input Yes
Isolation to All other 2 k Vrms
Connection Detachable screw terminal
Connector size 0.2 – 2.5 mm2 (AWG 24 – 12)
Shielded cable Not required
Interface specifications, RS-232
Electrical specification EIA RS-232
Data rate 300 bit/s – 115.2 kbit/s
Data format 7 or 8 data bits, Odd, even or none parity, 1 or 2 stop bits
Protocol Transparent, optimised by packing algorithm
Retiming Not applicable
Circuit type SELV
Transmission range 15 m / 49 ft
Isolation to Power 2 kVrms Ethernet 1; 1.5 kVrms
Connection 9-pin D-sub male (DTE)
Shielded cable Not required, except when installed in Railway applications as signalling and telecommunications apparatus and located close to rails
Conductive housing Isolated to all other circuits
Number of ports 2
Interface specifications, 10/100BaseTX
Electrical specification IEEE std 802.3. 2000 Edition
Data rate 10 Mbit/s or 100 Mbit/s, auto-negotiated or manually set by DIP-switches
Protocol UDP, TCP, ICMP, HTTP and ARP
Duplex Full- or half duplex, auto-negotiated or manually set by DIP-switches
Circuit type TNV-1
Transmission range 100 m
Isolation to Power 2 kVrms
RS-232 1.5 kVrms
RS-422/485 1.5 kVrms
Connection RJ-45 shielded, auto MDI/MDI-X
Shielded cable Not required, except when installed in Railway applications as signalling and telecommunications apparatus and located close to rails.
Conductive housing Isolated to all other circuits

Benzer ürün ve yazılar

Arama