EF24

Industrial Gigabit Ethernet to Fiber Smart Media Converter

  • Cut-Through Forwarding Mode 
  • Available in both SC and SFP Fiber Connectors 
  • Redundant Power Input 
  • Jumbo packets up to 9K bytes
  • Link Fault Pass-Through (LFP) and Link Loss Carry 
    Forward 
  • Operating Temperature : -10°C ~ 70°C


EF24 Series Industrial Gigabit Ethernet to Fiber Converter provide media conversion between 10/100/1000 BASE-T(X) and 100/1000 BASE-F(X) (available in both SC and SFP fiber connectors). 


EF24 Series comes with a DIP switch to configure or enable the more advanced functions including the fiber speed, fiber auto negotiation, link fail pass-through, terminal/center device, power saving, jumbo frame, and cut-through forwarding to reach the maximum flexibility. 

Ethernet
Connector RJ-45
Port(s) 1
Transmission Rate 10/100 Mbps
Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/ 100BASE-FX
Auto MDI/MDI-X Yes
Optical Fiber
Connector SC
Port(s) 1 (SC or SFP)
Transmission Rate
Fiber Wavelength 1310nm
Tx Output Power -9.5 ~ -4
Rx Sensitivity <-18
Fiber Distance 550M — Multi Mode
10KM — Single Mode
Power
Connector Removable 5 pin screw
Input Voltage 6~48V DC
Input Current 0.45A Max
Power Consumption
Reverse Polarity Protection Present
Redundancy Yes
Approval
EMS EN61000-4-2/4-4/4-6
Shock 40g @ 11ms, MIL-STD-810F Method 516.5
Freefall 122cm, MIL-STD-810F Method 516.5
Vibration MIL-STD-810F Method 514.5 C-1 & C-2
MTBF TBD
Protection 1p-50 (EN – 60529)
Environment
Operating -10°C ~ 70°C (14°F ~ 158°F)
Storage -40°C ~ 85°C (-40°F ~ 185°F)
Humidity 5 to 95%, 55°C (non-condensing)
Mechanical
(W x H x D) 32 x 90 x 110 mm (1.26 x 3.54 x 4.33 in)
Material Metal
Installation DIN-Rail mounting, wall mounting(optional)
Reset Button No
Weight N/A
Warranty 5 years

Benzer ürün ve yazılar

Arama