Parani-SD200

Parani-SD200 ( Bluetooth Seri RS232 Çevirici )

Özellikler

  • Bluetooth 1.2 Stack – Gelişmiş AFH ( Adaptive Frequency Hoping )
  • RS232 haberleşmesinde seri kablo gereksinimini ortadan kaldırır ve transparant seri haberleşme sağlar.
  • SPP(Serial Port Profile) Bluetooth profillerini destekler.
  • Laptop, PDA vb. bluetooth özellikli cihazlar ile karşılıklı çalışabilir.
  • Windows tabanlı yazılım (ParaniUpdater) ile firmware güncelleme desteği
  • Ürünün üzerinde bulunan dip switchlerin ve eşleştirme butonunun sayesinde, otomatik ve yazılıma ihtiyaç duymadan konfigürasyon desteği.
  • Çalışma mesafesi ( Açık alanda ) : (Class 2) Normal olarak 30 metre, opsiyonel yüksek kazançlı antenler ile 300 metreye kadar.
  • Kolay kullanımlı windows konfigürasyon uygulaması mevcut.
  • Kurulumu basit ve kolaydır. (ilave bir sürücü yazılımına ihtiyaç duymaz)

 

Parani-SD200 Parani-SD200L
CPU RS232, Female DB9, 1200 bps ~ 230 Kbps
CTS/RTS flow control: Default
DTR/DSR for loop-back & full transfer
Bluetooth Interface Bluetooth v1.2
Class 2
Level – Max. 4dBm
Protocols – RFCOMM, L2CAP, SDP
Profiles – General Access Profile, Serial Port Profile

Working distance

  • Default Antenna – Default Antenna 30 meters
  • Default Antenna – Dipole Antenna 50 meters
  • Dipole Antenna – Dipole Antenna 80 meters
  • Patch Antenna – Dipole Antenna 150 meters
  • Patch Antenna – Patch Antenna 300 meters
Max. Tx power +4dBm
Receive Sensitivity -80dbm
Antenna gain Stub : +2dBi, Dipole : +3dBi, Patch : +9dBi
Configuration ParaniWin, ParaniUpdater
Modem AT command set
Diagnostic LED
  • Power
  • Standby
  • Connect
  • RS232-Tx
  • RS232-Rx
Power – 5~12VDC

– Nominal current consumption :

  • SD100 : 100mA @ 5.0Vdc approximately
  • SD200 : 70mA @ 5.0Vdc approximately
– 5Vdc / 2A SMPS Adapter

– Nominal current consumption :

  • SD200L : 70mA @ 3.7Vdc approximately
Common Power supply options

  • Power via a standard AC-plug DC-adapter
  • Power via USB power cable
  • Power via DC power cable
  • Power via pin 9 of DB9 connector
  • Battery Pack for SD200 only
  • Internal Battery for SD200L only
Battery Usage
Time
– When using battery pack for SD200 :

  • Typical 1.5V -AA alkaline batteries (2500mAh) – Avg. 11hr@9600bps

– When using internal battery for SD200L :

  • Battery – 3.7V / 190mAh
  • Operating Time – up to 3hour
  • Charging Time – within 2hour

Note : Depending on the batteries and its usage environment greatly determines how long the Parani product will last for their application, i.e.battrery storage, battery capacity, battery brand and so on.

Environmental Operating temperature: -10’C to 55’C
Storage temperature: -20’C to 70’C
Humidity: 90% Non-condensing
Physical Properties Dimension (LxWxH)

  • 75.3 x 30.8 x 16.2 (mm)
Dimension (LxWxH)

  • 70 x 30.8 x 16.2 (mm)
Weight: 20g Weight: 26g
MTBF 394.4 Years
Regulatory
Approvals
FCC Part 15 Subpart C Section 15.247
FCC Part 15 Subpart B
ETSI EN 300 328
ETSI EN 301 489-1
ETSI EN 301 489-17
EN61000-3-2, EN61000-3-3
EN60950-1
MIC
TELEC
FCC Part 15 Subpart C
Section 15.247

FCC Part 15 Subpart B

Warranty 3-year Limited Warranty

Benzer ürün ve yazılar

Arama