PG5901

Industrial DNP3, Modbus, IEC 60870, IEC 61850 Protocol Gateway with 1 Sw-Selectable RS232/485/422 serial port and 2 Fast-Ethernet RJ45 ports, DIN-Rail

  • Dual 10/100 Mbps Ethernet port, with optional PoE
  • 1-port RS-232/422/485, baud rate up to 921.6 Kbps
  • IP30 Metal housing with Aluminum heat sink
  • Works in environments from -40 to 85°C
  • Same hardware platform for different protocol conversion (Modbus TCP/RTU/ASCII, DNP3.0 TCP or serial, IEC 60870-5-101, IEC 60870-5-103, IEC 60870-5-104, IEC 61850)
  • User friendly configuration with a Java-Based Windows utility

The PG5901 Series is a highly reliable and fault tolerant Industrial Protocol Gateway. Its powerful architecture provides seamless conversion between the different protocols Ethernet or Serial based. The serial devices communicating on different protocols could be integrated into the system and extend its reach over the gateway’s redundant Ethernet. This device is designed to work in most demanding industries such as power substations, power generation, oil and gas, farming and manufacturing.

The configuration carried out through a use friendly, Java- Based Windows Utility called eNode Designer. It allows configuring target platforms, set device properties and protocol data point mapping. To do so, a project file representing the system should be created. This will include devices and the protocol applications running on them. The configuration is completely dependent on the “eNode Module” which represents that device or application – but may include things such as changing the communication port settings and defining where data point information enters and leaves the eNode Designer system. Contact Us for Pricing

Network Interface
Ethernet Port 2x RJ-45
LAN Mode Dual Subnets or LAN Redundancy
Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
Serial Interface
Connector 5-Pin 5.08mm Terminal Block or D-Sub9 connector
Port 1
Mode RS-232/422/485, software selectable
Baud Rate 110~921,600 bps
Parity None, Odd, Even, Space, Mark
Data Bits 7,8
Stop Bits 1,2
Flow Control None, Xon/Xoff, RTS/CTS (RS-232 only)
USB Interface
Speed USB 2.0
Connector USB A Type *1
Power Characteristics
Connector 3-Pin 5.08mm Lockable Terminal Block
Input Voltage 9-48 VDC, or 48 VDC (supplied by PoE)
Power Consumption 0.65A @ 9VDC
Power Redundancy No
Reverse Polarity Protection Yes
Mechanicals
Housing IP30 protection, metal housing
Dimensions(W x H x D) 32mm x 110mm x 90mm
Installation DIN-Rail or Wall-Mount (optional kit)
Reset Button Yes
Weight 400g
Environmental Limits
Operating Temperature -40°C ~ 85°C (-40°F ~ 185°F)
Storage Temperature -40°C ~ 85°C (-40°F ~ 185°F)
Ambient Relative Humidity 5 ~ 95% RH, (non-condensing)
Software
Protocols IPv4, ARP, ICMP, TCP, UDP, DHCP Client, DNS Client, Telnet, HTTP, SNMP v1/v2c,Syslog
RegulatoryApprovals
Safety EN60950-1
 

 

 

EMC

FCCPart15, Subpart B, Class A

EN 55032

EN61000-3-2

EN61000-3-3

EN55024

Test Item Value Level
IEC 61000-4-2 ESD Contact Discharge

Air Discharge

±8KV

±15KV

4

4

IEC 61000-4-3 RS 80-1000MHz 10V/m 3
IEC 61000-4-4 EFT AC PowerPort

Signal Port

±2.0KV

±2.0KV

3

4

IEC 61000-4-5 Surge ACPowerPort

AC PowerPort

Signal Port

Line-to Line±1.0KV

Line-toEarth±2.0KV

Line-toEarth±2.0KV

3

3

3

IEC 61000-4-6 CS 0.15-80MHz 10Vrms 3
IEC 61000-4-8 PFMF Enclosure 10A/m 3
IEC 61000-4-11 DIP AC PowerPort 1.   >95%,Reduction,0.5period

2.   30%,Reduction,25period

>95%,Reduction,250period

Shock IEC 60068-2-27
Drop IEC 60068-2-32
Vibration IEC 60068-2-64
RoHS Yes
MTBF TBD
Warranty 5years

Benzer ürün ve yazılar

Arama