PG5904D

IIndustrial DNP3, Modbus, IEC 60870, IEC 61850 Protocol Gateway with 4 Sw-Selectable RS232/485/422 serial ports, 2 Fast-Ethernet or Gigabit ports, Dual power input, DIN-Rail

  • Dual 10/100 Mbps or 10/100/1000 Mbps Ethernet port, with optional PoE
  • 4-port RS-232/422/485, baud rate up to 921.6 Kbps
  • IP30 Metal housing with Aluminum heat sink
  • Works in environments from -40 to 85°C
  • Same hardware platform for different protocol conversion (Modbus TCP/RTU/ASCII, DNP3.0 TCP or serial, IEC 60870-5-101, IEC 60870-5-103, IEC 60870-5-104, IEC 61850)
  • User friendly configuration with a Java-B

 

 

The PG5904D Series is a highly reliable and fault tolerant Industrial Protocol Gateway. Its powerful architecture provides seamless conversion between the different protocols Ethernet or Serial based. The serial devices communicating on different protocols could be integrated into the system and extend its reach over the gateway’s redundant Ethernet. This device is designed to work in most demanding industries such as power substations, power generation, oil and gas, farming and manufacturing.

The configuration carried out through a use friendly, Java- Based Windows Utility caller eNode Designer. It allows configuring target platforms, set device properties and protocol data point mapping. To do so, a project file representing the system should be created. This will include devices and the protocol applications running on them. The configuration is completely dependent on the “eNode Module” which represents that device or application – but may include things such as changing the communication port settings and defining where data point information enters and leaves the eNode Designer system.

 

Hardware Specifications
Network Interface
 

EthernetPort

2×10/100BASE-T(X)RJ-4545or

2xSFPSlots

LAN-portMode Dual SubnetsorLANRedundancy
 

Compliance

IEEE802.3for10BASE-T

IEEE802.3ufor100BASE-T(X) IEEE802.3zfor 1000BASE-X

Serial Interface
Connector 1x25pin3.81mmTerminalBlock,orD-sub9connector
Ports 4
Mode RS-232/422/485,softwareselectable
BaudRate 50~921,600bps
Parity None,Odd,Even, Space,Mark
Data Bits 7,8
StopBits 1,2
FlowControl None,Xon/Xoff, RTS/CTS
Isolation 3 KV
USB Interface
Speed USB 2.0
Connector USB A Type*1
PowerCharacteristics
Connector Terminal Block
InputVoltage 12-48VDC,or 48VDC(supplied byPoE)
PowerConsumption 0.65A@12 VDC(max.)
PowerRedundancy Yes
Reverse PolarityProtection Yes
RelayOutput 1A@30 VDC (normalopen)
Mechanicals
Dimensions(WxH xD) 55mmx 145mmx 113mm
Installation DIN-Rail orWall-Mount (optional kit)
ResetButton Yes
Weight 1000g
EnvironmentalLimits
Operating Temperature -40°C~85°C(-40°F ~185°F)
StorageTemperature -40°C~85°C(-40°F ~185°F)
AmbientRelativeHumidity 5~95%RH,(non-condensing)
Software
Protocols IPv4, ARP, ICMP, TCP, UDP,DHCPClient,DNS Client, Telnet, HTTP, SNMP

v1/v2c,Syslog

Regulatory Approvals
Safety UL61010-2-201
 

 

 

EMC

FCCPart15, Subpart B, Class A

EN55032

EN61000-3-2

EN61000-3-3

EN55024

Test Item Value Level
IEC 61000-4-2 ESD Contact Discharge

Air Discharge

±8KV

±15KV

4

4

IEC 61000-4-3 RS 80-1000MHz 10V/m 3
IEC 61000-4-4 EFT AC PowerPort

Signal Port

±2.0KV

±2.0KV

3

4

IEC 61000-4-5 Surge AC PowerPort

AC PowerPort

Signal Port

Line-to Line±1.0KV

Line-toEarth±2.0KV Line-toEarth±2.0KV

3

3

3

IEC 61000-4-6 CS 0.15-80MHz 10Vrms 3
IEC 61000-4-8 PFMF Enclosure 10A/m 3
IEC 61000-4-11 DIP AC PowerPort 1.   >95%,Reduction,0.5period

2.   30%,Reduction,25period

3.   >95%,Reduction,250period

Shock IEC 60068-2-27
Drop IEC 60068-2-32
Vibration IEC 60068-2-64
RoHS Yes
MTBF TBD
Warranty 5years

Benzer ürün ve yazılar

Arama