PG5908

Industrial Rack-mount DNP3, Modbus, IEC 60870, IEC 61850 Protocol Gateway with 8 Sw-Selectable RS232/485/422 RJ45 serial ports, 2 Fast-Ethernet ports

  • Dual 10/100Mbps Ethernet for networking redundancy
  • Remotely monitor, manage, and control industrial field devices
  • Relay out indicator for Network link-status
  • LCM display with 4-key touch pad for configuration
  • Same hardware platform for different protocol conversion (Modbus TCP/RTU/ASCII, DNP3.0 TCP or serial, IEC 60870-5-101, IEC 60870-5-103, IEC 60870-5-104, IEC 61850)
  • User friendly configuration with a Java-Based Windows utility

 

The PG5908/PG5916 Series is a highly reliable and fault tolerant Industrial Protocol Gateway. Its powerful architecture provides seamless conversion between the different protocols Ethernet or Serial based. The serial devices communicating on different protocols could be integrated into the system and extend its reach over the gateway’s redundant Ethernet. This device is designed to work in most demanding industries such as power substations, power generation, oil and gas, farming and manufacturing.

The configuration carried out through a use friendly, Java- Based Windows Utility called eNode Designer. It allows configuring target platforms, set device properties and protocol data point mapping. To do so, a project file representing the system should be created. This will include devices and the protocol applications running on them. The configuration is completely dependent on the “eNode Module” which represents that device or application – but may include things such as changing the communication port settings and defining where data point information enters and leaves the eNode Designer system.

 

Hardware Specifications
NetworkInterface
EthernetPort 2xRJ-45
LAN Mode Dual SubnetsorLANRedundancy
 

Compliance

IEEE802.310BASE-T

IEEE802.3u100BASE-T(X)

SerialInterface
Connector RJ-45
Port 8or 16
Mode RS-232/422/485,softwareselectable
BaudRate 50~921,600bps
Parity None,Odd,Even, Space,Mark
Data Bits 5,6,7,8
StopBits 1,2
FlowControl None,Xon/Xoff, RTS/CTS (RS-232only)
PowerCharacteristics
 

Connector

IEC 60320-1C14AC PowerInlet(ACmodels)

5.08mm3-pin LockableTerminal Block(DCmodels)

 

InputVoltage

24-48VDCforDCmodels

100-240VACforACmodels

 

PowerConsumption

0.54A@24VDC

0.21A@100VAC

PowerRedundancy No
Reverse Polarity Protection Yes(DC Inputonly)
Mechanicals
Housing IP30protection,metal housing
Dimensions(WxH xD) 436mmx43.5 mmx200 mm
Installation 19”RackMount
ResetButton Yes
Weight 3.2kg(16ports)/3.0kg (8 ports)
EnvironmentalLimits
Operating Temperature -20°C~70°C(-4°F ~158°F)
StorageTemperature -40°C~85°C(-40°F ~185°F)
AmbientRelativeHumidity 5~95%RH,(non-condensing)
Software
Protocols IPv4, ARP, ICMP, TCP, UDP,DHCPClient,DNS Client, Telnet, HTTP, SNMPv1/v2c,

Syslog

RegulatoryApprovals
Safety EN 60950-1/IEC60950-1LVD
 

 

 

EMC

FCCPart15, Subpart B, Class B

EN55022,Class B EN61000-3-2

EN61000-3-3

EN55024

Test Item Value Level
IEC 61000-4-2 ESD Contact Discharge

Air Discharge

±8KV

±15KV

4

4

IEC 61000-4-3 RS Enclosure 10V/m 3
IEC 61000-4-4 EFT AC PowerPort

DCPowerPort

Signal Port

±4.0KV

±4.0KV

±2.0KV

4

4

3

IEC 61000-4-5 Surge AC PowerPort

AC PowerPort DCPowerPort DCPowerPort Signal Port

Line-to Line±2.0KV

Line-toEarth±4.0KV Line-toLine±1.0KV Line-toEarth±2.0KV Line-to Line±2.0KV

4

4

3

3

4

IEC 61000-4-6 CS AC PowerPort

DCPowerPort

Signal Port

10Vrms

10Vrms

10Vrms

3

3

3

IEC 61000-4-8 PFMF Enclosure 1A/m 3
IEC 61000-4-11 DIP AC PowerPort
Shock IEC60068-2-27
Drop ISTA TestProcedure2A
Vibration IEC60068-2-64
RoHS Yes
MTBF TBD
Warranty 5years

Benzer ürün ve yazılar

Arama