SE5416A2

16-Port Rack Mountable Serial Device Server with software selectable RS-232/422/485 serial RJ45connectors and 2 Fast-Ethernet RJ45 ports

  • Standard 19-inch rack-mount high metal housing 
  • Industrial EMC protection 
  • TCP Server/Client, UDP, Virtual COM and Tunneling modes 
    supported 
  • Dual 10/100Mbps Ethernet for networking redundancy 
  • Remotely monitor, manage, and control industrial 
    field devices 
  • Configuration via Web Browser / Serial Console / Telnet Console / Windows Utility 
  • Relay out indicator for Network link-status 
  • LCM display with 4-key touch pad for configuration 
  • Remote firmware upgrade 
  • Isolation (for SE5408A / SE5416A) 
  • Adjustable termination & pull high/low resistors 


Make Serial Devices Ready to the Network 

The Industrial Serial Device Server is a gateway between Ethernet (TCP/IP) and serial signal communications; allowing almost any serial device to be connected to a new or existing Ethernet network. 

By encapsulating serial data and transporting it over Ethernet, the Serial Device Server offers full-duplex and bi-directional data seamlessly between the serial ports and the Ethernet network. 


Easy to Use 

Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web browser, Serial Console, or our Windows utilities. Packed in a rugged metal housing with 19-inch rack mount and 100~240VAC or 24-48VDC power input range. 

The LAN port 1 and LAN port 2 can be assigned to different subnets. This feature gives the user flexible network manageability. Alternatively, the LAN port 1 and LAN port 2 can be assigned to the same IP network. It will enable the network to recover rapidly from failure and fault, so that the failures and faults will be bypassed. 


Specially Designed for Automation Fields 

In industrial and manufacturing automation fields, The Serial Device Server is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.

Ethernet
Connector RJ45
Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
Port(s) 2
Transmission Rate 10/100 Mbps
Auto MDI/MDI-X Yes
Serial
Connector RJ45
Mode RS-232 / RS-422 / RS-485 Software Selectable
Port(s) 8(SE5408A2)
16(SE5416A2)
Baud rate 50bps~921kbps
Parity None, Odd, Even, Mark, Space
Data bits 5,6,7,8
Stop Bit 1,2
Flow Control None, Xon/Xoff, RTS/CTS (RS-232 only)
Power
Connector IEC 60320-1 C14 AC Power Inlet (AC models) / 5.08mm 3-pin Lockable Terminal Block (DC models)
Input Voltage 100~240 VAC (AC models) / 24-48 VDC (DC models)
Input Current 0.21A (AC models) / 0.54A (DC models)
Power Consumption 21W (AC models) / 13W (DC models)
Reverse Polarity Protection Yes
Redundancy No
Approval
EMC FCC Class A, CE Class A
EMS ESD Level 4, RS Level 3, EFT Level 3, Surge Level 2, CS Level 3, PFMF Level 3, DIP.
Safety EN 60950-1
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Protection IP50
Environment
Operating -20°C~70°C (-4°F~158°F)
Storage -40°C~85°C (-40°F~185°F)
Humidity 5~95%RH(Non-condensing)
Mechanical
(W x H x D) 436 mm x 43.5 mm x 200 mm
Material Metal
Installation 19” Rack Mount
Reset Button Yes
Weight 3.2kg
Software
Configuration Serial Manager / Web UI / Telnet / Serial Console
Virtual COM Windows / Linux driver
Supported Protocol IPv4, ICMP, TCP, UDP, DHCP Client, SNMP, HTTP, Telnet, RFC2217, NTP, DNS, SMTP, Syslog
Link Mode
TCP Server 4 Connections, Virtual COM, Reverse Telnet
TCP Client Dual Destinations or Virtual COM
UDP 8 Ranges of IPs​
Warranty 5 years

 

Benzer ürün ve yazılar

Arama