SE5901

1-port Industrial Serial Device Server, Wide Temperature

• Industrial EMC protection, wide temperature operation, -40°C~85°C
• Rugged metal case with wall or DIN-Rail mount
• 2-port 10/100Mbps Fast Ethernet, 1-port USB 2.0 high speed OTG
• TCP Server/Client, UDP, Virtual COM and Tunneling modes supported
• Remotely monitor, manage, and control industrial field devices
• Configuration via Web Browser / Serial Console / Telnet Console /
Windows Utility
• Remote firmware upgrade
• Optional 802.3af PoE models can be powered through the Ethernet cable

Make Serial Devices Ready to the Network
The Industrial Serial Device Server SE5901 is a cost effective gateway for Ethernet (TCP/IP) and serial signal communications; allowing almost any serial device to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, SE5901 offers full-duplex and bi-directional data seamlessly between the serial port and the Ethernet network.

Easy to Use
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web Browser, Serial Console, or our Windows Utility.Packed in a rugged metal housing for wall or DIN-Rail mount with 9-48 VDC wide range power input, SE5901 is ideal for almost any industrial and manufacturing automation process. Atop Virtual COM software provides a virtual environment for applications when accessing SE5901 through TCP.

Specially Designed for Automation Fields
In industrial and manufacturing automation fields, SE5901 is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, and much more.

Rugged and flexible for advanced developments
SE5901 embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device. PoE versions can be powered through Power-over-Ethernet (PoE 802.3af), without additional cabling and power supply. SDK versions allow you to make use of the powerful hardware and develop your own applications on top of Atop’s reliable SDK.

Technical Speciications
Model Name SE5901
Network interface
Speed IEEE 802.3 10BaseT
IEEE 802.3u 100BaseT(X)
PoE standard supported IEEE 802.3 af (PoE)
Connector ports RJ45 x 2
Serial Interface
Connector D-Sub9 RS-232/422/485 software selectable (DB models)
5.08mm 5-Pin Terminal block RS-232/422/485 sw selectable (TB models)
Ports 1
Baud Rate 1,200 ~ 921,600 bps software selectable
Data Bits 5, 6, 7, 8 software selectable
Stop Bits 1, 2 software selectable
Flow Control None, Xon/Xoff, RTS/CTS
USB interface
Speed USB 2.0
Connector USB A Type
Power
Input Voltage 9 – 48VDC (non-PoE Models); or through Ethernet Cable (PoE versions)
Input Current (@ 9VDC) 0.65 A
Power Consumption Approximately 6 W (Max)
Connector 3-Pin 5.08mm Lockable Terminal Block
Reverse Polarity Protection Yes
Physical Characteristics
Housing
Dimension (W x H x D)
Weight
Installation
Reset Button
IP30 SPCC housing
32 x 110 x 90 mm (1.26 x 4.33 x 3.54 in)
400 g
DIN-Rail, Wall mount (optional kit)
Yes
Environmental Limits
Operating  Temperature
Storage Temperature
Ambient Relative Humidity
-40°C~85°C  (-40°F~185°F)
-40°C~85°C  (-40°F~185°F)
5%~95%, 55°C (Non-condensing)
Sofware
Protocols IPv4, ICMP, TCP, UDP, DHCP Client, SNMPv1,v2c,v3, HTTP, Telnet, RFC2217
Coniguration Atop Management Utility, Web UI, Telnet
VirtualCOM Windows/Linux redirection software
Link Modes
TCP Client Single destination or VirtualCOM
TCP Server 4 Connections; VirtualCOM or reverse Telnet
UDP Up to 4 Ranges IP
Regulatory Approvals
Safety EN60950-1:2006
EMC FCC Part 15, Subpart B, Class A
EN 55032, EN 55024, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 61000-6-4,
Test Item Value Level
IEC 61000-4-2 ESD Contact Discharge
Air Discharge
±8kV
±15kV
4
4
IEC 61000-4-3 RS Radiated (enclosure) 10 V/m 3
IEC 61000-4-4 EFT DC Power Port
Signal Port
±2.0KV
±2.0KV
3
3
IEC 61000-4-5 Surge DC Power Port
DC Power Port
Signal Port
Line-to Line±1.0KV
Line-to Earth±2.0KV
Line-to Earth±2.0KV
3
3
3
IEC 61000-4-6 CS Conducted (enclosure) 10 V rms 3
IEC 61000-4-8 PFMF Enclosure 10 A/m 3
IEC 61000-4-11 DIP Power Port A
Shock
Drop (Freefall)Vibration
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
RoHS II Yes
MTBF TBD
Warranty 5 years

Benzer ürün ve yazılar

Arama