8-Port Rack-mount IEC61850-3 Industrial Modbus TCP/RTU/ASCII Gateway

• Remotely access Modbus RTU/ASCII devices, convert to Modbus TCP
• Industrial EMC protection, wide temperature operation, -40°C~85°C
• IEC61850-3 certified, can be easily set up into IEC61850-3 substations
• Redundant Power Input for fault protection, either 24~48 VDC or High- Voltage AC/DC
6 Fast-Ethernet ports, either RJ45 or SFP slot
• 8 or 16 RS-232/RS-485/RS-422 Serial ports, with optional 2kV isolation
• Virtual COM Tunneling modes supported.
• Supporting advanced Modbus Features. Configuration via Web Browser
Serial Console/ Telnet Console/ Windows Utility, remote firmware upgrade

Diverse Hardware Infrastructure
Modbus Gateway supports the four most commonly used communication standards, RS-232/485/422, and Ethernet. The ease-ofuse configuration utility provided with Modbus Gateway can quickly select the hardware interface , and easily switch to the existing communication infrastructure. Industrial EMC protection, IEC61850-3 compliance, and wide temperature operation capability render MB5908A/16A ready for every mission.

Switching between Modbus Protocols
Modbus Gateway supports the standard Modbus protocol and is capable of converting any Modbus protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces. All of this, in bidirectional mode: Ethernet and Serial ends can selected to be either master or slave

Modbus ID Routing
Modbus Gateway supports various types of hardware communication interfaces, Modbus protocol conversion, and Modbus ID routing. Therefore the Modbus Gateway can integrate your existing and complex Modbus hardware configuration into a simple network that can be easily managed.

Technical Specifications
Model Name MB5908A (8 ports); MB5916A (16-ports)
Network interface
Speed IEEE 802.3 10BaseT
IEEE 802.3u 100BaseT(X) – RJ45 version
IEEE 802.3u 100Base-FX – SFP version
Connector ports RJ45 x 6 (RJ45 version)
SFP x 6 (SFP version)
Serial Interface
Connector D-Sub9 (DB models, supporting only 5-pin RS-232 mode) or
5.08mm 5-Pin Terminal block (TB Models)
Ports 8 (SE5908A) or 16 (SE5916A)
Mode RS-232/422/485 Software selectable
Baud Rate 1,200 ~ 921,600 bps software selectable
Data Bits 5, 6, 7, 8 software selectable
Stop Bits 1, 2 software selectable
Parity None, Odd, Even, Mark, Space
Flow Control None, Xon/Xoff, RTS/CTS (RS-232 only)
Input Voltage Redundant 24-48 VDC or
Redundant 100-240 VAC/ 100-370 VDC (HV Series)
Input Current 0.73 A @ 24 VDC
0.35 A @ 100 VAC
0.20 A @ 100 VDC
Power Consumption Approximately 20 W
Power Redundancy Yes
Connector 10-Pin Terminal Block
Reverse Polarity Protection Yes
Physical Characteristics
Dimension (W x H x D)
Reset Button
IP30 SPCC housing
440.6 x 44 x 309 mm (1U Rack-mount)
4 kg
19” Rack mount (Rack-mount kit included)
Environmental Limits
Operating  Temperature
Storage Temperature
Ambient Relative Humidity
-40°C~85°C (-40°F~185°F)
-40°C~85°C (-40°F~185°F)
5%~95%, 55°C (Non-condensing)
Protocols IPv4, ARP, ICMP, TCP, UDP, DHCP Client, SNMPv1,v2c,v3, HTTP, Telnet, Syslog
Coniguration Atop Management Utility, Web UI, Telnet, Console
VirtualCOM Windows/Linux redirection software
Modbus Features
Supported Modes Ethernet: Modbus TCP Server/Client(or VCOM);
Serial: Modbus RTU/ASCII (master/slave)
Supported Modes Modbus TCP: Maximum 16 clients;
Maximum 247 slaves
Regulatory Approvals
Safety EN 61010-2-201
EMC FCC Part 15, Subpart B, Class B, EN 55032, Class B, EN 61000-6-2 Class B, EN 61000-3-2,
EN 61000-3-3, EN 55024, EN 61000-6-4, IEC 61850-3 / IEEE 1613
Test Item Value Level
IEC 61000-4-2 ESD Contact Discharge
Air Discharge
IEC 61000-4-3 RS Radiated (enclosure) 10 V/m 3
IEC 61000-4-4 EFT AC Power Port
DC Power Port
Signal Port
IEC 61000-4-5 Surge AC Power Port
AC Power Port
DC Power Port
DC Power Port
Signal Port
Line-to Line±2.0KV
Line-to Earth±4.0KV
Line-to Line±1.0KV
Line-to Earth±2.0KV
Line-to Earth±2.0KV
IEC 61000-4-6 CS AC Power Port
DC Power Port
Signal Port
10 V rms 3
IEC 61000-4-8 PFMF Enclosure 100 A/m 5
IEC 61000-4-10 Damped Oscillatory Magnetic Field Enclosure 100 A/m 5
IEC 61000-4-11 DIP AC Power Port
IEC 61000-4-12 Damped Oscillatory AC Power Port
Signal Port
2.5 KV common, 1 KV differential
2.5 KV common, 1 KV differential
Drop (Freefall)
MIL-STD-810F Method 516.5
MIL-STD-810F Method 516.5
MIL-STD-810F Method 514.5 C1 & C2
Warranty 5 years

Benzer ürün ve yazılar