1-Port Serial Device Servers supporting RS-232, RS-422 and RS-485

  • Cigarette pack compact size 
  • Rugged metal case with wall or DIN-Rail mount 
  • 10/100Mbps Fast Ethernet full duplex auto negotiation 
  • Support TCP server/client, UDP, Virtual COM and 
    Tunneling modes 
  • Monitor, manage, and control industrial field devices 
  • Configuration: Web Server page / Serial Console / Telnet 
    Console / Windows Utility 
  • Upgrade firmware from a remote-PC via Ethernet 
  • Redundant dual DC power inputs for non-stop operation 

Make Serial Devices Ready to the Network 

The Industrial Serial Server SE5001 is a cost effective gateway for Ethernet (TCP/IP) and serial signal communications. It allows almost any serial device to be connected to a new or existing Ethernet network. 

By encapsulating serial data and transporting it over Ethernet, SE5001 offers full-duplex and bi-directional data that is transmission transparent between the serial port and the Ethernet network. 

Easy to Use 

Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web browser, Serial Console, or other Windows utilities. Packed in a rugged metal housing for wall or DIN-Rail mount with 5~30VDC wide power input range, SE5001 is ideal for almost any industrial and manufacturing automation. 

ATOP Virtual COM software provides existing Windows based application to access serial device by mapping the Virtual COM port to a remote serial server via Ethenet. 

Specially Designed for Automation Fields 

In industrial and manufacturing automation fields, SE5001 is used as a field device to connect the Ethernet through TCP/IP protocol directly. It is also specially designed for conjunction with PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans, Shop Floor Control Systems, and Pick-to-Light Systems.

Connector RJ-45
Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
Port(s) 1
Transmission Rate 10/100 Mbps
Auto MDI/MDI-X Yes
Connector DB9
Mode RS-232/422/485 (SE5001)
RS-232 (SE5001-S2)
RS422/485 (SE5001-S5)
Isolation No
Port(s) 1
Baud rate 1200bps~230kbps
Parity None, Odd, Even, Mark, Space
Data bits 7,8
Stop Bit 1,2
Flow Control None, Xon/Xoff, RTS/CTS
Connector 5.08mm 3-pin Terminal Block and DC Jack
Input Voltage 9-30 VDC (TB3) and 5V (DC Jack)
Input Current 0.17A
Power Consumption 2.7W max.
Reverse Polarity Protection Yes
Redundancy No
EMC FCC Class A, CE Class A
EMS Meet Minimal Regulatory Requirement
Safety EN 60950-1
MTBF 57 years
Operating 0°C~60°C (32°~140°F)
Storage -40°~85°C (-40°~185°F)
Humidity 5~95%RH(Non-condensing)
(W x H x D) 65mm x78mm x 28mm
Material Metal
Installation DIN Rail, Wall mount (optional)
Reset Button Yes
Weight 200g
Configuration Serial Manager / Web UI / Telnet
Virtual COM Windows / Linux driver
Supported Protocol IPv4, ICMP, TCP, UDP, DHCP Client, SNMP, HTTP, Telnet, RFC2217
Link Mode
TCP Server 4 Connections, Virtual COM, Reverse Telnet
TCP Client Single Destinations or Virtual COM
UDP 4 Ranges of IPs
Warranty 5 years

Benzer ürün ve yazılar